Description
1. Parameter specifications
1.1 Motor diaphragm pump
Engine type: 385
Voltage: DC / 12V
Current: ≤0. 4
Power: 4.8 W
Flow rate: 1.8 ± 1L / min
Head: 5M (limit parameters, preferably within 2 meters)
Maximum continuous running time 120 H (limit parameters, preferably controlled within 2 hours)
2. Technical requirements
Applicable water temperature 5-100 ° C
Operating temperature 5 ° C-40 ° C
Working water pressure 0.3Mpa
Operating system / cooling time: more than 8 hours per day / natural cooling
Appearance requirements: the electrophoretic paint must not fall, the fittings are loose and the rubber feet must not be damaged.
Size requirements:
The unit is mm. During installation, the compression of the suspension rubber should be checked at 1-1.5 mm.
The inlet and outlet of the pump are 7mm in diameter.
Electrical power:
external coating between power port and 500 V / 50HZ / No power loss and breakdown between 1 minute
Boost and flow performance: 1.8 ± 0.1L / min
Maximum current: ≤0. 4
Constant temperature test: After drying, placed in an environment of 40 ± 2 ° C and relative humidity of 93% ± 3% for 48 hours, electrical performance can still meet the requirements.
Reviews
There are no reviews yet.